CMP Specialty Products, Inc.

Concrete Tool and Texturing now carries CMP’s line of Restoration products

admin — Thu, 03 Dec 2009 14:15:35 +0000

CTTS is one of the most respected dependable decorative concrete suppliers in the country. CTTS is located in Throop, PA and sells a complete line of tools and construction products throughout the United States. CTTS and proprietor Bart Sacco are know for the level of experience and the decorative concrete seminars held at CTTS and attended by contractors throughout the United States. For more information on CTTS visit www.concrete-texturing.com

Verticrete

admin — Thu, 03 Dec 2009 03:43:32 +0000

Verticrete is a non-gypsum, polymer enhanced, one component resurfacer for filling and smoothing interior and exterior vertical concrete and masonry surfaces. Mixed only with clean potable water, Verticrete is ideal for skim coating and smoothing imperfections in tilt up panels and other pre-cast structures.

Technical Data

Comp. Strength (28 Day) 4700 psi

pH (Wet State)11

Physical Data

Color Grey/White

Packaging 10 lb. Pail

Shipping Information 100 Bags / Pallet

Coverage (Per 10 lb. bag) *substrate dependent

CR-90

admin — Thu, 03 Dec 2009 03:42:49 +0000

CR-90 is a high performance, quick turnaround, concrete resurfacer that when mixed only with water “makes old concrete new again”. CR-90 applications are a cost effective durable answer to expensive concrete replacement. CR-90 corrects both horizontal and vertical surfaces that are worn, spalled and distressed.

Technical Data

Comp. Strength (28 Day) 5000 psi

Flexural Strength (28 Day) 1000 psi

Installed Weight at ¼” 2.08 lbs. per sq. ft.

pH (Wet State)11

Dry Density: 100 lb / ft³

Physical Data

Color Grey/White

Packaging 50 lb. Bag

20 Lb. Pail

Shipping Information 50 Bags / Pallet

100 Pails / Pallet

Coverage (Per 50 lb. bag) 100 sq. ft. @ 1/16″

Premium Patch

admin — Thu, 03 Dec 2009 03:42:04 +0000

Premium Patch is a one component, polymer modified, cement based concrete and masonry patching compound requiring only the addition of potable mixing water. Premium Patch is suited for patching and/or resurfacing distressed horizontal surfaces. It is intended for fast turn around repairs and contains a special migratory corrosion inhibitor.

Technical Data

Comp. Strength (28 Day) 6500 psi

Flexural Strength (28 Day) 1180 psi

Installed Weight at ¼” 2.08 lbs. per sq. ft.

pH (Wet State)11

Dry Density: 100 lb / ft³

Physical Data

Color Grey/White

Packaging 50 lb. Bag

Shipping Information 50 Bags / Pallet

Coverage (Per 50 lb. bag) 25 – 30 sq. ft

LF-Primer

admin — Thu, 03 Dec 2009 03:40:08 +0000

LF Primer is liquid polymer latex designed to be both a sealer and bonding agent for interior applications of the Level Finish System. All Level Finish Systems must be used in conjunction with LF Primer. LF Primer is a concentrated re-emulsifiable adhesive specifically designed to enhance the properties of the Level Finish Systems providing maximum adhesion and seal between the substrate and the leveler.

Technical Data

Solids Content 54%

Flash Point N/A

Density8.9 lbs. Per Gallon

Drying Time2-3 Hours @ 70

Physical Data

Color Milky White

Packaging 1 Gallon Pail/4-Case

5 Gallon Pail

Shipping Information 36 Cases / Pallet

36 Pails / Pallet

Coverage (Per Gallon) 200-300 sq. ft

Polybond

admin — Thu, 03 Dec 2009 03:39:23 +0000

Poly-Bond is a water based, non-yellowing, high solids, acrylic polymer emulsion bonding admixture for Cement mortars, plaster, stuccos and concrete mixes. Poly-Bond improves adhesion, tensile, cohesion and flexural strengths of cement based compounds.

When exposed to moisture it will not re-emulsify and can be used in both interior and exterior applications. It is a milky white liquid slightly thicker than water.

Technical Data

Solids Content 50%

Flash Point N/A

Density 8.9 Lbs. Per Gallon

Drying Time2-3 hours @ 70

Physical Data

Color Milky White

Packaging 1 Gallon Pail/4-Case

5 Gallon Pail

Shipping Information 36 Cases / Pallet

36 Pails / Pallet

Coverage (Per 50 lb. bag) 200-300 sq. ft

EP-440

admin — Thu, 03 Dec 2009 03:38:47 +0000

EP-440 is a water based two component resin dispersion for priming very dense, smooth, non-absorbent substrates such as terrazzo, marble, metal decking, ceramic and quarry tile prior to the installation of the Level Finish Systems.

All Level Finish Systems must be used in conjunction with a CMP Primer’s. See individual product data sheets

Technical Data

Density 1.10kg / Liter

Flash Point N/A

Density 8.9 Lbs. Per Gallon

Drying Time2-3 hours @ 70

Physical Data

Color (Mixed)Light Blue

Packaging 2.4 Gallon Units

Shipping Information 40 Units / Pallet

Coverage (Per Unit) 700 sq. ft per unit

CMP 1000

admin — Thu, 03 Dec 2009 03:37:48 +0000

CMP-1000 is a unique, clear, epoxy modified protective breathable Concrete sealer which penetrates and becomes an integral part of the concrete substrate. CMP-1000 is a one-step single application sealer that is VOC, EPA, FDA and OSHA compliant and solvent-free. CMP-1000 resists water intrusion, freeze-thaw weathering, acid rain, salt spray and other corrosives to insure the integrity of the concrete.

Technical Data

Drying Time 2-3 Hours @ 70

Physical Data

Color Milky White

Density 8.9 lbs. Per Gallon

VB 770

admin — Thu, 03 Dec 2009 03:37:17 +0000

VB – 770 is a unique, high performance water-based crystallization product chemically designed to permanently block moisture and vapor transmission in concrete or masonry structures up to 16 lbs / 1000 sq. ft. This unique formulation blocks moisture and vapor through concrete and masonry substrates within 24 hours of application.

Technical Data

Specific Gravity 1.09

Freeze Temperature24

Boiling Point215

Drying Time1-2 Hours

Physical Data

Color Clear

Packaging 5 Gallon Pail

55 Gallon Drum

Shipping Information 36 Pails / Pallet

4 Drums / Pallet

Coverage (Per Gallon) 2 Coats: 100 sq. ft.

Ultra Finish

admin — Thu, 03 Dec 2009 03:36:10 +0000

Ultra Finish is a Cement based, rapid setting, trowel applied underlayment used level and smooth sub-floors prior to the installation of finished floor coverings. Ultra Finish’s polymer modified binding system allows for excellent adhesion to virtually any substrate such as properly prepared ceramic tile, concrete, plywood, and well bonded cut-back adhesive.

Technical Data

Comp. Strength (28 Day)4700 psi

Flexural Strength (28 Day) 1100 psi

Installed Weight at ¼” 2.08 lbs. per sq. ft.

pH (Wet State)11

Dry Density: 100 lb / ft³

Physical Data

Color Concrete Grey

Packaging 10 lb. Pail

15 lb. Bag

Shipping Information 100 Pails / Pallet

100 Bags / Pallet

Coverage (Per 50 lb. bag) 35 sq. ft @ 1/8″

CMP Specialty Products, Inc.

Concrete Tool and Texturing now carries CMP’s line of Restoration products

Verticrete

Technical Data

Physical Data

Literature

Features & Benefits

CR-90

Technical Data

Physical Data

Literature

Features & Benefits

Premium Patch

Technical Data

Physical Data

Literature

Features & Benefits

LF-Primer

Technical Data

Physical Data

Literature

Features & Benefits

Polybond

Technical Data

Physical Data

Literature

Features & Benefits

EP-440

Technical Data

Physical Data

Literature

Features & Benefits

CMP 1000

Technical Data

Physical Data

Literature

Features & Benefits

VB 770

Technical Data

Physical Data

Literature

Features & Benefits

Ultra Finish

Technical Data

Physical Data

Literature

Features & Benefits