VB 770
VB – 770 is a unique, high performance water-based crystallization product chemically designed to permanently block moisture and vapor transmission in concrete or masonry structures up to 16 lbs / 1000 sq. ft. This unique formulation blocks moisture and vapor through concrete and masonry substrates within 24 hours of application.
Comments
CMP 1000
CMP-1000 is a unique, clear, epoxy modified protective breathable Concrete sealer which penetrates and becomes an integral part of the concrete substrate. CMP-1000 is a one-step single application sealer that is VOC, EPA, FDA and OSHA compliant and solvent-free. CMP-1000 resists water intrusion, freeze-thaw weathering, acid rain, salt spray and other corrosives to insure the integrity of the concrete.
Comments
Polybond
Poly-Bond is a water based, non-yellowing, high solids, acrylic polymer emulsion bonding admixture for Cement mortars, plaster, stuccos and concrete mixes. Poly-Bond improves adhesion, tensile, cohesion and flexural strengths of cement based compounds.
When exposed to moisture it will not re-emulsify and can be used in both interior and exterior applications. It is a milky white liquid slightly thicker than water.
Comments
EP 440
EP-440 is a water based two component resin dispersion for priming very dense, smooth, non-absorbent substrates such as terrazzo, marble, metal decking, ceramic and quarry tile prior to the installation of the Level Finish Systems.
All Level Finish Systems must be used in conjunction with a CMP Primer’s. See individual product data sheets
Comments
LF-Primer
LF Primer is liquid polymer latex designed to be both a sealer and bonding agent for interior applications of the Level Finish System. All Level Finish Systems must be used in conjunction with LF Primer. LF Primer is a concentrated re-emulsifiable adhesive specifically designed to enhance the properties of the Level Finish Systems providing maximum adhesion and seal between the substrate and the leveler.