PRIVATE LABEL NEWS CAREERS ABOUT CMP

CONTACT US
                             
   

Phone: 215.672.6364  I  Fax: 215.672.6384
                             
PRODUCT LINE ARCHITECTS CONTRACTORS PRODUCT FAQ's TECH SUPPORT REFERENCES
  Home  »  Product Line  »  Skimcoats and patching compounds  
   
           
    SKIMCOATS AND PATCHING COMPOUNDS     
       
    Ultra Finish  → Skim Finish → SR-P  → IFP                      
                                                 
                                               
   

 ULTRA FINISH

PREMIUM CEMENT BASED SKIMCOAT

    
                                                 
                                                 
    Ultra Finish is a Cement based, rapid setting, trowel applied underlayment used level and smooth sub-floors prior to the installation of finished floor coverings. Ultra Finish’s polymer modified binding system allows for excellent adhesion to virtually any substrate such as properly prepared ceramic tile, concrete, plywood, and well bonded cut-back adhesive.     TECHNICAL DATA    
        Comp. Strength (28 Day) 4700 psi    
        Flexural Strength (28 Day) 1100 psi    
        Installed Weight at 1/4" 2.08 lbs. per sq. ft.    
        pH (Wet State) 11    
        Dry Density: 100 lb / ft³    
               
          PHYSICAL DATA    
   

FEATURES AND BENEFITS

     Color Concrete Grey    
    Workable for over 15minutes     Packaging 10 lb. pail    
    Re-wippable after initial set       25 lb. bag    
    Applies from feather edge up to ½" without cracking     Shipping Information 100 pails / pallet    
            100 bags / pallet    
    Water damage stable - Non-Gypsum based     Coverage (Per 10 lb. pail) 35 sq. ft @ 1/8"    
    No priming needed!                    
    Contains no protein additives     LITERATURE DOWNLOADS & TOOLS    
    Mixes only with water     Technical Datasheet      
    Excellent Coverage     Material Safety Sheet      
                            CSI Formatted Specifications      
                                                 
                                                 
         
   

 SKIM FINISH

ECONOMICAL CEMENT BASED SKIMCOAT AND PATCH

    
                                                 
                                                 
   

Skim Finish is a polymer modified, rapid setting trowel applied patching compound used to level and smooth sub-floors prior to the installation of finished floor coverings. Skim Finish offers excellent workability, high coverage rate and fast turnaround allowing finished floor coverings to be installed in as little as 1 hour after application.

    TECHNICAL DATA    
        Comp. Strength (28 Day) 5500 psi    
        pH (Wet State) 11    
               
        pH (Wet State) 11    
        Dry Density: 100 lb / ft³    
               
          PHYSICAL DATA    
   

FEATURES AND BENEFITS

     Color Concrete Grey    
    Walkable in 2-3 hours     Packaging 25 lb. bag    
    Can be installed with aggregate up to 5"     Shipping Information 100 bags / pallet    
    Water damage stable - Non-Gypsum based     Coverage (Per 50 lb. bag) 100-140 sq. ft @ 1/32"    
    No additional preparation for sensitive floor coverings                    
    Contains no protein additives     LITERATURE DOWNLOADS & TOOLS    
    Extremely low emissions     Technical Datasheet      
    Ideal for pumping or barrel mixing     Material Safety Sheet      
                            CSI Formatted Specifications      
                                                 
                                                 
         
   

 SR-P

      CEMENT BASED SLOPE AND RAMPING PATCH

    
                                                 
   

SR-P is a Cement based trowel applied patching compound that is used to repair sub-flooring prior to the installation of CMP’s underlayments, toppings or finished floor coverings. SR-P’s excellent workability makes it easy for repairing and smoothing concrete floors, ramps, pre-cast and stairways. 

    TECHNICAL DATA    
        Comp. Strength (28 Day) 5750 psi    
        Flexural Strength (28 Day) 1100 psi    
        Installed Weight at 1/4" 2.08 lbs. per sq. ft.    
        pH (Wet State) 11    
        Dry Density: 100 lb / ft³    
               
          PHYSICAL DATA    
   

FEATURES AND BENEFITS

     Color Concrete Grey    
    Walkable in 2-3 hours     Packaging 50 lb. pail    
    Can be installed without aggregate up to 1½"       2250 lb. "Super Sak"    
    Can be installed with aggregate up to 5"     Shipping Information 50 bags / pallet    
    Water damage stable - Non-Gypsum based     Coverage (Per 50 lb. bag) 25 - 30 sq. ft    
    No additional preparation for sensitive floor coverings                    
    Contains no protein additives     LITERATURE DOWNLOADS & TOOLS    
    Extremely low emissions     Technical Datasheet      
    Ideal for pumping or barrel mixing     Material Safety Sheet      
                            CSI Formatted Specifications      
                                                 
                                                 
         
   

 IFP

HEAVY DUTY, FAST SETTING INDUSTRIAL FLOOR PATCH

    
                                                 
   

IFP is a fiber reinforced, Cement based, rapid setting, trowel applied patching compound that is used on industrial applications where turnaround time is critical. I